HXE-13DT Intermediate copper wire drawing machine with continuous annealing
I. Composition
1. Pay-off shelf
2. HXE-13DT Copper wire drawing machine
3. HXE-TH350 Annealing machine
4. HXE-180 Tension controller
5. HXE-SX630 Double spooler
7. Operation panel
8. Drawing control cabinet
9. Annealing control cabinet
Intermediate copper wire drawing machine with continuous annealing is used to drawing and annealing single bare copper wire from 3.0mm-3.5mm to 0.8mm-2.8mm
II. Main technical parameters
| Machine type | HXE-9DT | HXE-13DT |
| Control system | Traditional analog type/digital control with production record |
| Outlet diameter(mm) | 1.0-2.8 | 0.8-2.8 |
| Inlet diameter(mm) | 3.0-3.5 | 3.0-3.5 |
| Max.line speed | 900 | 1000 |
| Die number | 9 | 13 |
| Slip ratio | 19.6%+16.4% |
| Frame | Welded by steel plate |
| Capstan | Tungsten |
| Max capstan diameter | 280mm |
| Fix speed capstan diameter | 280mm |
| Spooler bobbin size | 400-630mm |
| Bobbin loading&unloading type | Double end thimbles |
| Max.loading capacity | 500KG/MAX |
| Annealing method | DC.Three-section annealing |
| Main motor | AC45KW |
| Spool motor | AC11KW*2 |
| Max.annealing current | DC3000A |
| Max.annealing voltage | DC60V |
| Annealing power | 180KVA |
| Steam quantity | 18kg/h |
| Cooling water capacity | 650L/min |
| Compressed air capacity | 0.4~0.6Mpa,50L/min |
| Power source | 380V 50/60HZ |
| Dimension | 13300*3500*3400 |
| Weight | 8500KG | 8500KG |
III. After-sale service
Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take responsibility, but if the Buyer agree, will charge fees accordingly to repair the machine.
A. Due to wrong operation while shipping.
B. Due to Buyer`s wrong preparation that may cause damage to the machine.
C. Due to Buyer`s wrong operation that may cause damage to the machine.
D. Not in the consuming part list.
E. After agreement are made for the shipping, for any damage, Buyer should inform Seller in letter form to repair in seven days, If beyond the dare, Seller shall take no responsibility.
F. For any other failures due to acts of God (such as lightning, typhoon, earthquake, riots, war, fire or flood) and other factors that will cause damage, Seller shall take no responsibility.
G. Seller guarantee provide long term support regarding the parts and teach. After warranty, will charge accordingly.
IV. Lifting the machine, installation, adjustment
4-1. Lifting, there are four lifting rings to lift.
4-2. Installation, please check the external drawing and foundation drawing of the machine, dig the ground, put the machine in position, check the horizontal level, adjust the ground screws, put concrete slurry, after dry and fix, check the horizontal level again, then fix the machine by the ground screws.
4-3. Adjustment, clean all parts, check all the part no loose.
Product Tags:
|
|
Customized Intermediate Wire Drawing Machine AC 45KW With Continuous Annealing Images
|
